Eaton Tripp Lite Series Cable Ladder, 2 Sections - SRCABLETRAY or SRLADDERATTACH Required, 10 x 1.5 ft. (3 x 0.3 m)
Eliminate Cable Stress by Organizing Cabling Outside Your Enclosure or Open Frame Rack
The SmartRack SRCABLELADDER18 mounts to the top of your rack enclosure or open frame rack for overhead cable routing. Install it either parallel or perpendicular to the rack for clean, organized cable routing across an aisle or within a row. Each SRCABLELADDER measures 10 feet long and 1.5 feet wide for safe cable bundling. It requires the use of Tripp Lite's SRCABLETRAY (for enclosures) or SRLADDERATTACH (for open frame racks) for installation (both accessories sold separately). An included grounding stud allows tie-in to the rack and facility ground. The SRCABLELADDER18 ships in two five-foot sections for convenient storage and assembly.
Typical Applications
- Neatly bundle cable across an aisle or within a row of bayed racks in your data center
System Requirements
- SRCABLETRAY (rack enclosures) or SRLADDERATTACH (open frame racks)
- Works in tandem with Tripp Lite SRCABLETRAY or SRLADDERATTACH (sold separately)
- 5-year limited warranty
- Arrives boxed in dual 5 ft. sections for easy shipping, storage and assembly
- Measures 10 ft. long and 1.5 ft. wide for organized cable bundling
- Allows cables to span aisles or spaces between racks in the same row
- Cuts cable clutter by routing cable bundles overhead in your data center
- Provides roof-mounted cable routing for Tripp Lite SmartRack® enclosures, allowing cable bundles to span aisles or spaces between racks.
Only 1 in stock
Shipping calculated at checkout
Eliminate Cable Stress by Organizing Cabling Outside Your Enclosure or Open Frame Rack
The SmartRack SRCABLELADDER18 mounts to the top of your rack enclosure or open frame rack for overhead cable routing. Install it either parallel or perpendicular to the rack for clean, organized cable routing across an aisle or within a row. Each SRCABLELADDER measures 10 feet long and 1.5 feet wide for safe cable bundling. It requires the use of Tripp Lite's SRCABLETRAY (for enclosures) or SRLADDERATTACH (for open frame racks) for installation (both accessories sold separately). An included grounding stud allows tie-in to the rack and facility ground. The SRCABLELADDER18 ships in two five-foot sections for convenient storage and assembly.
Typical Applications
- Neatly bundle cable across an aisle or within a row of bayed racks in your data center
System Requirements
- SRCABLETRAY (rack enclosures) or SRLADDERATTACH (open frame racks)
- Works in tandem with Tripp Lite SRCABLETRAY or SRLADDERATTACH (sold separately)
- 5-year limited warranty
- Arrives boxed in dual 5 ft. sections for easy shipping, storage and assembly
- Measures 10 ft. long and 1.5 ft. wide for organized cable bundling
- Allows cables to span aisles or spaces between racks in the same row
- Cuts cable clutter by routing cable bundles overhead in your data center
- Provides roof-mounted cable routing for Tripp Lite SmartRack® enclosures, allowing cable bundles to span aisles or spaces between racks.
- 2 x Ladder Sections
- 2 x Assembly Brackets
- 2 x Clevis Pins
- 2 x Cotter Pins
- 2 x Ground Brackets
- 2 x M6 Hex Bolts
- 3 x Ground Cables, 2 ft.
- 2 x Ladder Clamps
- 2 x M6 Lock Washers
- 2 x M6 Hex Nuts
- 2 x M10 x 60 mm Carriage Bolts
- 2 x M10 Lock Washers
- 2 x M10 Hex Nuts
- Owner's Manual
LTT PARTNERS
We are a full-service Systems and Solutions Integrator. Through close relationships with dozens of top technology brands, we are the preferred partner for many enterprise organizations and industry leaders.
ONGOING SUPPORT
We pride ourselves on building long-term relationships with our partners and clients. From initial consultation to post-installation maintenance, we are always available and happy to help through our support network.