Black Box Async RS232 Extender over CATx - DB9 with Control Signals to Terminal Block
SKU: ME890A-R2
- Use long-distance CATx links to communicate with serial devices.
- Control presentations remotely.
- Transfer data between computers.
- Ideal for a wide variety of applications.
- Optical isolated.
- Maximum speed of 250 K.
- Easy installation. The driver provides full-duplex transmission and hardware handshake signals. There's no need for setup or configuration.
These CATx Line Drivers enable the user to place a receiving device up to 4000 feet away from the sending device. The local unit has a DB9 female connector and is configured as a DCE device; the remote unit has a DB9 male connector and is configured as a DTE device. This allows the local/remote pair to function as a long extension cable between two RS-232 devices. There are no user-configurable settings. These units pass TXD, RXD, RTS, and CTS signals to allow application to use hardware handshake signals if neccessary.
- Plug-and-play! The driver is a pure hardware solution providing real-time data transfer with no software conflicts.
- Maximum speed of 250 K.
- Run data and handshake signals over CATx cable and break the RS-232 distance limitation.
- Has 1000-VDC isolation between CATx and RS-232 interfaces.
- Supports distances up to 4000 feet.
- Optical isolated.
4 in stock
Regular price
$405.20
Shipping calculated at checkout
- Use long-distance CATx links to communicate with serial devices.
- Control presentations remotely.
- Transfer data between computers.
- Ideal for a wide variety of applications.
- Optical isolated.
- Maximum speed of 250 K.
- Easy installation. The driver provides full-duplex transmission and hardware handshake signals. There's no need for setup or configuration.
These CATx Line Drivers enable the user to place a receiving device up to 4000 feet away from the sending device. The local unit has a DB9 female connector and is configured as a DCE device; the remote unit has a DB9 male connector and is configured as a DTE device. This allows the local/remote pair to function as a long extension cable between two RS-232 devices. There are no user-configurable settings. These units pass TXD, RXD, RTS, and CTS signals to allow application to use hardware handshake signals if neccessary.
- Plug-and-play! The driver is a pure hardware solution providing real-time data transfer with no software conflicts.
- Maximum speed of 250 K.
- Run data and handshake signals over CATx cable and break the RS-232 distance limitation.
- Has 1000-VDC isolation between CATx and RS-232 interfaces.
- Supports distances up to 4000 feet.
- Optical isolated.
Additional Information:
- Cable Requirement CATx
- Connectors Local unit: (1) DB9 F (DCE), (1) RJ-45, (1) power jack;
- Remote unit: (1) DB9 M (DTE), (1) RJ-45, (1) power jack
- Distance 4000 ft. (1219.2 m) maximum
- Interface RS-232
- Operation Asynchronous, full-duplex
- Power Input: 100-240 VAC;
- Output: 12-VDC power adapter
- Speed 250 kbps maximum
Certifications & Standards:
- CE
- UL
Country of Origin:
United States
Environmentally Friendly:
Yes
Environmental Compliance:
Waste Electrical and Electronic Equipment Directive (WEEE),Restriction of Hazardous Substances (RoHS)
Limited Warranty:
1 Year
Manufacturer:
Black Box Corporation
Manufacturer Website Address:
http://www.blackbox.com
Maximum Data Transfer Rate:
31.25 kB/s
Maximum Extended Range:
4000 ft
Network (RJ-45):
Yes
Package Contents:
- 1 x Local Unit
- 1 x Remote Unit
- 2 x 120 V Power Supplies
Product Type:
Serial Extender
TAA Compliant:
Yes
LTT PARTNERS
We are a full-service Systems and Solutions Integrator. Through close relationships with dozens of top technology brands, we are the preferred partner for many enterprise organizations and industry leaders.
ONGOING SUPPORT
We pride ourselves on building long-term relationships with our partners and clients. From initial consultation to post-installation maintenance, we are always available and happy to help through our support network.