Cisco Nexus V9P-3 200Gigabit Ethernet Card
Highest-density network application card
The Cisco Nexus® SmartNIC+ V9P is an FPGA-based network application card, optimized for low latency and high density.
The device packs a powerful 16nm Xilinx Virtex UltraScale Plus (VU9P) FPGAs with 2.5M logic cells, into a compact, half-height, half-length, PCIe 16x form factor.
High-capacity and low-latency memory | An extensive memory hierarchy for complex, memory-intensive applications
The Xilinx VU9P FPGA (Field Programmable Gate Array) features 75Mbit of block RAM and 270Mbit of UltraRAM on chip. The Cisco Nexus SmartNIC+ V9P further incorporates an additional 9GB of DDR4 DRAM on the board for high throughput access. The DRAM is accessible via a 72-bit-wide bus for maximum performance.
The Cisco Nexus V9P-3 FPGA Application SmartNIC model performs at a higher speed reducing the compile time by 40% over the V9P model compile times, that reduces project build time while increasing network uptime. The improved V9P-3 model logic performance and the faster clocked FPGA helps to eliminate any timing issues and can be programmed to reduce network latency to create a better user experience.
High-bandwidth connectivity | Dual QSFP-DD ports provide up to 400Gbps of full duplex connectivity.
The dual QSFP-DD ports offer high-speed 4x40GbE or 2x200GbE connectivity. Using QSFP-DD breakout cables expands the connectivity to 16x10GbE/25GbE4 connections. This high-density connectivity enables a range of high-performance, directly connected network applications, bypassing the need for traditional switching and multiplexing requirements.
Extensive IP library | Cisco is a specialist in low-latency, high-performance FPGA IP cores.
We provide you the same high-speed, low-latency IP blocks used in our market leading products, including:
- 10GbE PCS/MAC with ultra-low-latency performance
- Low-latency, high-throughput PCIe DMA engine
- Timing, signaling, and register interfaces, including I2C
- Packet field extractor and frame multiplexer (with source code)
- Asynchronous FIFO and CDC modules (with source code)
Several example designs are also provided to help get design work started and completed quickly.
- 200Gigabit Ethernet Card offers maximum efficiency and usability
- Enjoy superfast data transfer of up to 16000 MB/s with PCI Express 3.0 x16 card, between the network card and motherboards
- This dual port 200gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation
- Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components
- With the 100GBase-SR4 technology get up to 40Gbps data transfer rate over the optical fiber cable
Call for Availability
Shipping calculated at checkout
Highest-density network application card
The Cisco Nexus® SmartNIC+ V9P is an FPGA-based network application card, optimized for low latency and high density.
The device packs a powerful 16nm Xilinx Virtex UltraScale Plus (VU9P) FPGAs with 2.5M logic cells, into a compact, half-height, half-length, PCIe 16x form factor.
High-capacity and low-latency memory | An extensive memory hierarchy for complex, memory-intensive applications
The Xilinx VU9P FPGA (Field Programmable Gate Array) features 75Mbit of block RAM and 270Mbit of UltraRAM on chip. The Cisco Nexus SmartNIC+ V9P further incorporates an additional 9GB of DDR4 DRAM on the board for high throughput access. The DRAM is accessible via a 72-bit-wide bus for maximum performance.
The Cisco Nexus V9P-3 FPGA Application SmartNIC model performs at a higher speed reducing the compile time by 40% over the V9P model compile times, that reduces project build time while increasing network uptime. The improved V9P-3 model logic performance and the faster clocked FPGA helps to eliminate any timing issues and can be programmed to reduce network latency to create a better user experience.
High-bandwidth connectivity | Dual QSFP-DD ports provide up to 400Gbps of full duplex connectivity.
The dual QSFP-DD ports offer high-speed 4x40GbE or 2x200GbE connectivity. Using QSFP-DD breakout cables expands the connectivity to 16x10GbE/25GbE4 connections. This high-density connectivity enables a range of high-performance, directly connected network applications, bypassing the need for traditional switching and multiplexing requirements.
Extensive IP library | Cisco is a specialist in low-latency, high-performance FPGA IP cores.
We provide you the same high-speed, low-latency IP blocks used in our market leading products, including:
- 10GbE PCS/MAC with ultra-low-latency performance
- Low-latency, high-throughput PCIe DMA engine
- Timing, signaling, and register interfaces, including I2C
- Packet field extractor and frame multiplexer (with source code)
- Asynchronous FIFO and CDC modules (with source code)
Several example designs are also provided to help get design work started and completed quickly.
- 200Gigabit Ethernet Card offers maximum efficiency and usability
- Enjoy superfast data transfer of up to 16000 MB/s with PCI Express 3.0 x16 card, between the network card and motherboards
- This dual port 200gigabit ethernet card lets you add two network ports using a single expansion slot to a client, server or workstation
- Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components
- With the 100GBase-SR4 technology get up to 40Gbps data transfer rate over the optical fiber cable
LTT PARTNERS
We are a full-service Systems and Solutions Integrator. Through close relationships with dozens of top technology brands, we are the preferred partner for many enterprise organizations and industry leaders.
ONGOING SUPPORT
We pride ourselves on building long-term relationships with our partners and clients. From initial consultation to post-installation maintenance, we are always available and happy to help through our support network.