Skip to content

NVT Phybridge Power Supply Passive Video Receiver Hub

SKU: NV-8PS13-PVD
Features:
  • Provides Class 2 SELV camera power while receiving video transmission and delivering P/T/Z telemetry all over a single 4-pair Cat5e cable
  • Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B
  • Independently selectable 24VAC-OFF-28VAC with 1 Amp per channel
  • Automatic-reset fault protection; transient protection
  • Individually floating outputs ensure total ground-loop immunity
  • Frequency response DC to 10MHz
  • Diagnostic LEDs show load/no load, miswires, and overload conditions
  • Use with the NV-216A-PV, NV-218A-PVD, or NV-226J-PV transceiver at the camera
  • Power cameras via UTP over significant distances (see Power Distance Chart)
  • 1U high; 8" deep; wall, desk, or rack-mountable, 2ft (60cm) BNC Cables included
  • Limited lifetime warranty
The 8-channel NV-8PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel. Use with NVT's PVDTM transceivers for cable runs under 750ft (225m). A built-in passive receiver hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display load /no-load, miswires, or fault conditions at a glance. Automatic-reset fault protection, transient protection, and ground loop free individually floating outputs.

Call for Availability

Regular price $1,050.25 Sale price $1,200
On Sale

Shipping calculated at checkout

Details
Features:
  • Provides Class 2 SELV camera power while receiving video transmission and delivering P/T/Z telemetry all over a single 4-pair Cat5e cable
  • Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B
  • Independently selectable 24VAC-OFF-28VAC with 1 Amp per channel
  • Automatic-reset fault protection; transient protection
  • Individually floating outputs ensure total ground-loop immunity
  • Frequency response DC to 10MHz
  • Diagnostic LEDs show load/no load, miswires, and overload conditions
  • Use with the NV-216A-PV, NV-218A-PVD, or NV-226J-PV transceiver at the camera
  • Power cameras via UTP over significant distances (see Power Distance Chart)
  • 1U high; 8" deep; wall, desk, or rack-mountable, 2ft (60cm) BNC Cables included
  • Limited lifetime warranty
The 8-channel NV-8PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel. Use with NVT's PVDTM transceivers for cable runs under 750ft (225m). A built-in passive receiver hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display load /no-load, miswires, or fault conditions at a glance. Automatic-reset fault protection, transient protection, and ground loop free individually floating outputs.
Specifications
Connectivity Technology:
Wired
Environmentally Friendly:
Yes
Environmental Compliance:
Waste Electrical and Electronic Equipment Directive (WEEE),Restriction of Hazardous Substances (RoHS)
Form Factor:
Rack-mountable,Wall Mountable,Desktop
Limited Warranty:
Lifetime
Manufacturer:
Phybridge, Inc
Manufacturer Website Address:
http://www.phybridge.com
Maximum Operating Distance:
750 ft
Media Type Supported:
Twisted Pair
Network (RJ-45):
Yes
Number of Network (RJ-45) Ports:
10
Package Contents:
  • Power Supply Passive Video Receiver Hub
  • Rack Mount "L" Brackets
  • Rubber Feet
  • 8 x 2ft (60cm) Coax Jumpers
  • Molded IEC power inlet cord 7ft (200cm)
Product Model:
NV-8PS13-PVD
Product Type:
Video Extender Receiver
Receiver Depth:
12"
Receiver Height:
1.73"
Receiver Weight (Approximate):
14 lb
Receiver Width:
19"
Twisted Pair Cable Standard:
Category 5e

LTT PARTNERS

We are a full-service Systems and Solutions Integrator. Through close relationships with dozens of top technology brands, we are the preferred partner for many enterprise organizations and industry leaders.

Learn more
Smiling man on a support team on a virtual call with a headset.

ONGOING SUPPORT

We pride ourselves on building long-term relationships with our partners and clients. From initial consultation to post-installation maintenance, we are always available and happy to help through our support network.

Learn more

Have Questions? We Can Help!

Close (esc)

GET 10% OFF SELECT PRODUCTS!

Enter your email to take advantage of this one time offer.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Header > Main Menu

Shopping Cart