{"product_id":"cable-coupler","title":"Cable coupler","description":"\u003cp\u003eThe DICENTIS cable coupler enables Technicians to connect DICENTIS cable assemblies (with one another or with standard CAT-E cable) without the need for special tools.\u003c\/p\u003e\u003cp\u003eThe cable coupler can be used to:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e  Connect two DICENTIS cables so you can easily increase cable length.\u003c\/li\u003e\n\u003cli\u003e  Connect two DICENTIS cables, where one is always present and ends in a \"floor pod\" and the other cable is only connected when it is required (for example, a rostrum microphone which will not always be used). The cable coupler can be fixed with screws to the floor pod.\u003c\/li\u003e\n\u003cli\u003e  Interconnect DICENTIS cable with standard CAT5-E cable and power cable so you can comply with local regulations or make use of current available infrastructure\u003c\/li\u003e\n\u003cli\u003e  Interconnect DICENTIS cable with standard CAT5-E cable and a 48VDC power supply close to the devices\u003c\/li\u003e\n\u003cli\u003e  Create a circuit to power on a system without the need of a Multimedia device, a PC running the Meeting application, or Synoptic control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eFunctions\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e  Makes it is easier to adjust cables to the required length when installing rental systems. Offers a means to create cables for the desired length by just interconnecting standard cables without the need for special tools.\u003c\/li\u003e\n\u003cli\u003e  Makes it easy to connect \"temporary\" devices (for example, a rostrum microphone) to the DICENTIS system. At the location of the rostrum microphone, the cable coupler is used as the endpoint of the cable (mounted in a floor pod).\u003c\/li\u003e\n\u003cli\u003e  Makes it possible to comply to the most stringent norms for fixed\/installation cable in buildings. Enables you to use standard CAT-5E and power cable for the part where the norms have to be met, and DICENTIS cable in the conference room.\u003c\/li\u003e\n\u003cli\u003e  Makes it easy to re-use existing infrastructure\/ networks (for example, if a CAT-5E network is already in place).\u003c\/li\u003e\n\u003cli\u003e  Makes it possible to place a 48 VDC power supply (not part of the Bosch portfolio) close to the participant devices.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eRequirements for the power supply:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e  nominal output of 48 VDC (ranging from 47 - 49 VDC).\u003c\/li\u003e\n\u003cli\u003e  the ripple should be less than 200 mV pk-pk.\u003c\/li\u003e\n\u003cli\u003e  maximum output current should not exceed 3.0 A (or limited to 3.0 A, because DICENTIS cables and devices have a maximum rating for this current).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eAdvice \u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e  It is strongly advised that the power supply has its own short circuit protection with a short circuit output current ranging from 4.3 to 5.0 A.\u003c\/li\u003e\n\u003cli\u003e  When the power supply has an automatic restart after a short circuit, this restart function should have an interval time of 3 to 4 seconds and should have no more than 4 restart attempts.\u003c\/li\u003e\n\u003cli\u003e  Upon powering off the power supply, the output should be less than 9 V, 1 mA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eProvides an easy way to interconnect DICENTIS cable assemblies\u003c\/li\u003e\n\u003cli\u003eProvides an easy way to interconnect DICENTIS cables assemblies with non-DICENTIS cable\u003c\/li\u003e\n\u003cli\u003eProvides an easy way to create a connection for temporary devices, like a rostrum microphone\u003c\/li\u003e\n\u003cli\u003eProvides an easy way to use an external power supply for your devices\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bosch","offers":[{"title":"Default Title","offer_id":67663742435513,"sku":"DCNM-CBCPLR","price":389.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/241988064.jpg?v=1791410224","url":"https:\/\/www.lttpartners.com\/products\/cable-coupler","provider":"LTT Partners","version":"1.0","type":"link"}