{"title":"Veracity","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eVeracity provides transmission and storage solutions. Offers Ethernet-over-coax, long-range PoE, and surveillance storage for IP video systems.\u003c\/p\u003e","products":[{"product_id":"veracity-camswitch-plus-vcs-4p1-ethernet-switch","title":"Veracity CAMSWITCH Plus VCS-4P1 Ethernet Switch","description":"\u003cb\u003eCompact and versatile 802.3at POE switches\u003c\/b\u003e\u003cbr\u003e \u003cp\u003eCAMSWITCH 4 PLUS REPLACES CAMSWITCH QUAD. \u003cbr\u003e \u003cbr\u003e CAMSWITCH Plus network switches are 803.af\/at Power over Ethernet (POE) 10\/100 switches designed especially to meet the challenges of IP video installation. An optional POE input enables remote positioning and range extension, or a local power supply can be specified for maximum power budget. \u003cbr\u003e \u003cbr\u003e CAMSWITCH 4 Plus features 4 802.3at POE ports, and a 5th port for downlink. \u003cbr\u003e \u003cbr\u003e CAMSWITCH 8 Plus features 8 802.3at POE ports, as well as 2 further network ports, and is compatible with Veracity's rack-mounting system.\u003c\/p\u003e \u003cp\u003e\u003cb\u003e802.3at POE Power\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eCAMSWITCH Plus can deliver up to the full 25.5 watts required by IEEE 802.3at POE Plus devices such as outdoor or PTZ cameras.  A selection of power supply options are available to suit the total power requirements and placement considerations of the installation.\u003c\/p\u003e \u003cp\u003e40 watt and 78 watt camera\/device power budgets are available from standard power supplies, or the full 200 watts for 8 POE Plus ports can be delivered using Veracity's forthcoming rackmount power solutions.\u003c\/p\u003e \u003cp\u003eCAMSWITCH Plus can be powered by POE, doubling the distance to connected devices or enabling network connections to be easily added to existing installations.  Up to 25 watts budget at 200 metres is available using Veracity's OUTSOURCE Plus injector.\u003c\/p\u003e \u003cp\u003eWhen a 57V power supply is used, CAMSWITCH Plus can deliver enhanced POE to Veracity OUTREACH Max, HIGHWIRE PowerStar and LONGSPAN products for maximum range.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eDesigned for installers\u003cbr\u003e\u003cbr\u003e\u003c\/b\u003eCamswitch Plus's network ports configure automatically for speed, duplex and crossover, and deliver 802.3af\/at POE to compliant devices with no user setup required.\u003c\/p\u003e \u003cp\u003eSnap-on clips are provided for secure wall mounting, and up to 4 units can be mounted in an optional 1U rack bracket.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEthernet Switch provides reliable, efficient connectivity to ensure maximum feasibility\u003c\/li\u003e\n\u003cli\u003eCreate your own LAN and connect your PC, laptop, printer and other peripherals with the help of 5 ports\u003c\/li\u003e\n\u003cli\u003eLayer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree\u003c\/li\u003e\n\u003cli\u003eFeaturing Fast Ethernet ports to speed up the transfer rate up to 100mb\/sec of large files and digital assets across your network\u003c\/li\u003e\n\u003cli\u003eTwisted Pair media support for efficient and reliable connectivity\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":45138138759353,"sku":"VCS-4P1","price":294.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/234754638.jpg?v=1751468802"},{"product_id":"veracity-timenet-pro-gps-master-ntp-time-server-inc-antenna","title":"Veracity TIMENET Pro GPS Master NTP Time Server inc. Antenna","description":"\u003cb\u003eTIMENET Pro is a Master NTP reference clock for Ethernet networks\u003c\/b\u003e\u003cbr\u003e \u003cp\u003eTIMENET Pro is an accurate, low cost, extremely compact universal atomic clock reference for network time synchronisation.\u003cbr\u003e \u003cbr\u003e CCTV and digital video recorder (DVR) installations require accurate reference time signals for synchronisation of system clocks to ensure that they are always set at the precisely correct time. It is crucial that all recordings are accurately time-stamped, especially for evidential purposes. Many DVR products, especially those which are PC-based, have inaccurate internal clocks which drift by many seconds per week. Considering that DVR systems may be left unattended for months on end, it is easy to see that the time settings can end up being in error by many minutes.\u003c\/p\u003e \u003cp\u003eTIMENET Pro supports all NTP compatible devices\u003c\/p\u003e \u003cp\u003eIdeal for synchronising VMS + ACS servers \u0026amp; clients\u003c\/p\u003e \u003cp\u003eIdeal for closed or secure networks\u003c\/p\u003e \u003cp\u003eIdeal for mobile or vehicle-based applications\u003c\/p\u003e \u003cp\u003eClass 1 POE compatible (or 12V DC input)\u003c\/p\u003e \u003cp\u003eSimple browser interface allows fast installation\u003c\/p\u003e \u003cp\u003eWide operating temperature range.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eTIMENET Pro Master NTP Server\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eTIMENET Pro is a low-cost solution for accurately synchronising computer system clocks Time Synchronisation Most network installations require a reference time signal for synchronising system clocks to ensure they are always set precisely to the correct time. It is crucial that all CCTV recordings are accurately time-stamped, especially for evidential purposes.\u003c\/p\u003e \u003cp\u003eMost Digital Video Recorder (DVR) products - especially those which are PC-based - have inaccurate internal clocks which can drift by many seconds per week. Considering that DVR and NVR systems should run unattended for months or years, the time settings can end up being in error by many minutes, or even hours. Further, multiple recorders and devices will drift apart time-wise, reducing the veracity of evidential data.\u003c\/p\u003e \u003cp\u003eTIMENET Pro can be wall-mounted, uses very little power and is less than half the cost of competing solutions. TIMENET Pro can be powered over the network by POE, or locally by a low voltage power supply.\u003c\/p\u003e \u003cp\u003eBrowser Interface TIMENET Pro provides a clean and simple browser interface for setting up the IP address and configuration password. The status tab displays information such as system up-time, GPS lock, UTC and local time, plus an extremely useful satellite signal meter. This meter shows satellites in view, and their signal strength.\u003c\/p\u003e \u003cp\u003eInstaller Friendly Simply connect the antenna to the TIMENET Pro and the TIMENET Pro to your POE network switch. Configure the IP address via the easy-to-use browser interface and the TIMENET Pro installation is complete. The antenna that is supplied with the unit includes a 5 metre cable. This can be extended further by adding an optional 10 metre long cable (VTN-EXTEND). The antenna has a self-adhesive surface which can be fixed to any window which has a view of the sky.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eAbout UTC Time\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eUniversal co-ordinated time is an official world-wide atomic clock standard for time, agreed by national standards around the world. UTC time copes with variations in the earth's rotation by the introduction of leap-seconds at pre-defined intervals. GPS time references incorporate this automatically. Therefore TIMENET Pro will continuously provide an accurate UTC clock reference automatically.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eAbout NTP\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eNTP stands for Network Time Protocol and is a universal standard for time synchronisation of computers or other devices on a network. TIMENET Pro is NTP-compatible and acts as a time server for any NTP compatible device.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for closed or secure networks\u003c\/li\u003e\n\u003cli\u003eIdeal for mobile or vehicle-based applications\u003c\/li\u003e\n\u003cli\u003eIdeal for synchronising VMS + ACS servers \u0026amp; clients\u003c\/li\u003e\n\u003cli\u003eIdeal for CCTV and DVR applications\u003c\/li\u003e\n\u003cli\u003eTIMENET Pro supports all NTP compatible devices\u003c\/li\u003e\n\u003cli\u003eAccurate universal atomic clock reference\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":45140378452153,"sku":"VTN-TN-PRO","price":902.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/234782112.jpg?v=1751539255"},{"product_id":"veracity-camswitch-8-mobile-8-2-port-low-voltage-802-3at-switch","title":"Veracity CAMSWITCH 8 Mobile, 8+2 Port Low Voltage 802.3at Switch","description":"\u003cb\u003eLow voltage POE Plus switches for 12\/24V applications\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eCAMSWITCH Mobile is the ideal solution for installing IP cameras and other POE and network devices in transport, battery\/solar powered, and other low-voltage applications. It integrates a 5 or 10 port 10\/100 Ethernet switch with the capability to convert a 8 to 40 volt DC supply into an 80 watt IEEE 802.3af\/at compliant power source.\n\u003cul\u003e\n\u003cli\u003eEthernet Switch ensures productivity by providing an efficient, hassle-free connection\u003c\/li\u003e\n\u003cli\u003eCreate your own LAN and connect your PC, laptop, printer and other peripherals with the help of 10 ports\u003c\/li\u003e\n\u003cli\u003eWith leading Layer 2 support, experience enhanced convenience, secure business operations, and a borderless network experience\u003c\/li\u003e\n\u003cli\u003eFeaturing Fast Ethernet ports to speed up the transfer rate up to 100mb\/sec of large files and digital assets across your network\u003c\/li\u003e\n\u003cli\u003eSupports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":45143886692537,"sku":"VCS-8P2-MOB","price":622.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/234842908.jpg?v=1751665051"},{"product_id":"veracity-ethernet-extender","title":"Veracity Ethernet Extender","description":"\u003cp\u003eOUTREACH Lite provides a simple way to double the length of a 10\/100 Ethernet connection. No configuration is required, it does not require a local power supply, and it does not restrict the throughput of the network link at all.\u003c\/p\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":45310458036409,"sku":"VORORL","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/241986786.jpg?v=1756942279"},{"product_id":"veracity-30w-power-over-ethernet-injector-outsource-30","title":"Veracity 30W Power Over Ethernet Injector OUTSOURCE 30","description":"\u003cp\u003e\u003cb\u003eCompact POE injector that delivers reliable POE for IP cameras and devices\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eDelivers enhanced 30W POE to all 802.8af and 802.3at standard devices. OUTSOURCE 30 is GigE compatible and automatically detects compatible devices\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDelivers reliable remote power to IP cameras and POE devices\u003c\/li\u003e\n\u003cli\u003eCompatible with gigabit Ethernet\u003c\/li\u003e\n\u003cli\u003eSafety assured as POE is only enabled to compliant devices\u003c\/li\u003e\n\u003cli\u003e30W Power output\u003c\/li\u003e\n\u003cli\u003eCompact, wall-mountable unit\u003c\/li\u003e\n\u003cli\u003eIntegrated overload protection\u003c\/li\u003e\n\u003cli\u003eSealed, fanless design for reliability\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":45328090759353,"sku":"VOR-OS-30-US","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/242174403.jpg?v=1757533865"},{"product_id":"veracity-outreach-max-ethernet-and-poe-extender","title":"Veracity OUTREACH Max Ethernet and PoE Extender","description":"\u003cp\u003eOUTREACH Max enables network installers to overcome the distance limitations of Ethernet and Power over Ethernet (PoE) easily, meaning that IP cameras, wireless access points, and other PoE-powered network devices can be located right where they are needed.\u003c\/p\u003e\u003cp\u003eSimply connect OUTREACH Max in-line with the Cat5 or Cat6 network cable for every extra 100 meters (328 feet) of length required. No configuration or electrical supply is needed, and full-rate network throughput is maintained.\u003c\/p\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":45435475329209,"sku":"VOR-ORM","price":186.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/242377694.jpg?v=1760576863"},{"product_id":"veracity-highwire-longstar-camera-side-long-range-ethernet-over-coax","title":"Veracity HIGHWIRE Longstar - Camera Side - Long Range Ethernet over Coax","description":"\u003cp\u003e\u003cb\u003eUnrestricted 100Base-T and POE over 1400m\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eHIGHWIRE Longstar delivers unsurpassed power and bandwidth over extreme distances of coax cable.\u003cbr\u003e \u003cbr\u003e Deliver unsurpassed power and bandwidth over extreme distances of coaxial cable. Cut costs and installation time by re-using long runs of legacy coax cabling, especially in rail and metro applications.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eLong-range Ethernet with POE over coax at distances up to 1,400 metres\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eHIGHWIRE Longstar's ruggedness and high performance is particularly suited to rail, metro and industrial applications. HIGHWIRE Longstar delivers unsurpassed distances.\u003c\/p\u003e \u003cp\u003eHIGHWIRE Longstar delivers a full bandwidth 100Base-T network signal and POE Plus over unsurpassed lengths of regular coaxial cable. It provides the reassurance of exceptional performance and reliability, while enabling considerable savings in the cost, time and risk of upgrading legacy analogue camera installations to IP.\u003c\/p\u003e \u003cp\u003eA range of 540 - 690 metres with RG-59 or even up to 1400 metres with RG-11 is supported, without compromising the 100Base-T data rate. For even greater distances it can automatically configure to 10Base-T operation, running approximately three times further with data only. Models with optional POE in or out can deliver the full 25 watts of 802.3at POE Plus to cameras over the same legacy cable.\u003c\/p\u003e \u003cp\u003eDesigned for straight-forward installation, all the HIGHWIRE Longstar models are entirely self-configuring, and feature extended temperature operation, have a rugged enclosure with both wall-mount or high density rack mounting options.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eDesigned for Installers\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eUsed in pairs, installation of HIGHWIRE Longstar is extremely fast and efficient. The devices self-configure and self optimise on connection. No set-up or system pairings are required. Data and power connections are easily monitored during installation using the embedded LEDs. The system incorporates Veracity's SafeView™ technology, which provides instant confirmation of link status, power level and diagnostic information.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eFlexible High Performance\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eAlthough designed for 75 Ohm cable, HIGHWIRE Longstar will operate over 50 Ohm cable with full performance and only a slight reduction in the maximum distance attainable.\u003c\/p\u003e \u003cp\u003e\u003cb\u003ePOE - Simple Reliability\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003ePOE-equipped models allow all of the power for the link to be sourced from a POE switch, POE injector or power supply, for simple installation and optional UPS backed power delivery for high resilience against grid power failures.\u003c\/p\u003e \u003cp\u003eHIGHWIRE Longstar is a rugged and low-cost alternative to fibre, also with power delivery It is also suited to new coax installations, due to the low levels of signal distortion through long runs of RG6 or RG11 cabling\u003c\/p\u003e \u003cp\u003eSimple Rackmount Option Up to 24 HIGHWIRE Longstar Base units can be rack-mounted using the simple 1U space-saving bracket. Although HIGHWIRE Longstar POE models can be powered from POE switches or injectors, several Veracity 57V DC power supply options are available (see partcodes) to provide the maximum power and range performance.\u003c\/p\u003e \u003cp\u003eVeracity Power Supply Options Rack-mounted HIGHWIRE Longstar units can be powered by the Veracity 57V DC 1U rackmount power supply. This 8.8A power supply can provide enough power for up to 24 HIGHWIRE Longstar units with POE output. The power unit can be fitted behind the rack-mounted HIGHWIRE Longstars in the same 1U space, thus saving rack space.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBS EN 50121-4 compliant (rail and metro)\u003c\/li\u003e\n\u003cli\u003eUp to 4.2km (2.5 miles) data-only link at 10Base-T without POE\u003c\/li\u003e\n\u003cli\u003eFully automatic, simple to install and maintenance-free\u003c\/li\u003e\n\u003cli\u003eRuggedised for high-performance over extreme temperature range\u003c\/li\u003e\n\u003cli\u003eUnrestricted 100Base-T and POE over 1400m (4,600ft) on RG11\u003c\/li\u003e\n\u003cli\u003eLong range Ethernet and POE over new or legacy coaxial cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":45437988602041,"sku":"VLS-1P-CC","price":338.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/242504980.jpg?v=1760635381"},{"product_id":"veracity-vhw-wmb-mounting-bracket-for-surveillance-camera-taa-compliant","title":"Veracity VHW-WMB Mounting Bracket for Surveillance Camera - TAA Compliant","description":"Veracity VHW-WMB Mounting Bracket for Surveillance Camera - TAA Compliant","brand":"Veracity","offers":[{"title":"Default Title","offer_id":46411533615289,"sku":"VHW-WMB","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/242234386.jpg?v=1771458610"},{"product_id":"veracity-longspan-max-base-hi-power-90w-long-range-ethernet-up-to-820m","title":"Veracity LONGSPAN Max (Base). Hi-Power, 90W long-range Ethernet, up to 820m.","description":"\u003cp\u003e\u003cb\u003eThe Power and Bandwidth your IP Camera Needs, at Exceptional Distances\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eLONGSPAN delivers unprecedented power and bandwidth over extreme lengths of regular Cat 5e or Cat 6 network cable, enabling a dependable connection to IP cameras and other remote network devices.\u003cbr\u003e\u003cbr\u003eLONGSPAN is a point-to-point solution. It self-configures for the best performance. No set up or configuration is required. LONGSPAN even supports single-pair UTP cables, providing a fast upgrade solution for legacy analogue systems.\u003cbr\u003e\u003cbr\u003eLONGSPAN offers unrestricted 100Base-TX at a phenomenal 820 metres range, with POE-equipped models delivering full-power 802.3at POE Plus at 600 metres, LONGSPAN assures reliability in the most challenging scenarios.\u003cbr\u003e\u003cbr\u003eLONGSPAN is available in POE and data-only models. It is also available in high power Max single and Quad versions for the base and camera ends. See Documentation Tab for all datasheets including LONGSPAN Base 8, LONGSPAN Max and LONGSPAN Max Quad datasheets.\u003c\/p\u003e \u003cp\u003eUnrivalled range, uncompromised bandwidth\u003cbr\u003e\u003cbr\u003eIP cameras can demand peak network bandwidth of several times their average data rate while transmitting critical high-activity or low-light scenes. That's why LONGSPAN has been designed to support the full 200Mbps bandwidth required for reliable 100Base-TX Ethernet at up to 820 metres Cat 6 (or 690 metres Cat 5e).\u003cbr\u003e\u003cbr\u003eFor even more extreme distances, LONGSPAN can automatically negotiate a 10Base-T connection, supporting a range in excess of 1000 metres, over ten times the conventional limit for cabled Ethernet.\u003c\/p\u003e \u003cp\u003eMore power, much further\u003cbr\u003e\u003cbr\u003eLONGSPAN models with POE can be powered from conventional IEEE 802.3af POE or 802.3at POE Plus and 802.3bt High Power POE switches and injectors, or Veracity's versatile power supply options can be specified for maximum range and power.\u003cbr\u003e\u003cbr\u003eThe full 25 watts required for POE Plus devices is available at up to 600 metres Cat 6 when a Veracity power supply is used, or 5 to 20 watts can be delivered from other POE sources depending on range and cable type. LONGSPAN Max High Power devices are also now available up to 90W.\u003cbr\u003e\u003cbr\u003eUpgrade to IP, keep the UTP\u003cbr\u003e\u003cbr\u003eSites with legacy analogue cameras often use UTP baluns to send video over several hundred metres of twisted pair cable.  LONGSPAN facilitates a simple upgrade path to IP for these installations.\u003cbr\u003e\u003cbr\u003eLONGSPAN can automatically detect and adapt to single-pair cables, and deliver the same uncompromised 10 or 100Base-TX connection up to 820 metres, assuring predictable IP video quality each and every time.\u003c\/p\u003e \u003cp\u003eHigh density, high reliability\u003c\/p\u003e \u003cp\u003eLONGSPAN's unique, expandable mounting system permits up to 24 channels to be mounted in just 1U of rack space, with configurable rear-mount power supplies available if desired.\u003cbr\u003e\u003cbr\u003eSmart diagnostic LEDs, including a SAFEVIEW® display on POE models, provide instant confirmation of cable-dependent power availability, and feedback of remote link status and other diagnostic information, for fast, confident installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutdoor or perimeter IP cameras, buried cable links\u003c\/li\u003e\n\u003cli\u003eWireless access points or any POE devices\u003c\/li\u003e\n\u003cli\u003eExtension of all Ethernet networks\u003c\/li\u003e\n\u003cli\u003eUpgrade of analogue cameras fitted with twisted pair video baluns\u003c\/li\u003e\n\u003cli\u003eAnywhere there's UTP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":46467330867385,"sku":"VLS-LSM-B","price":384.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/241904516.jpg?v=1772208774"},{"product_id":"veracity-long-range-ethernet-and-poe","title":"Veracity Long Range Ethernet and POE","description":"\u003cb\u003eThe Power and Bandwidth your IP Camera Needs, at Exceptional Distances\u003c\/b\u003e\u003cbr\u003e \u003cp\u003eLONGSPAN delivers unprecedented power and bandwidth over extreme lengths of regular Cat 5e or Cat 6 network cable, enabling a dependable connection to IP cameras and other remote network devices. \u003cbr\u003e \u003cbr\u003e As a point-to-point solution with no mid-cable equipment and smart, automatic self-configuration, installation is simple and instantaneous. LONGSPAN even supports single-pair UTP cables, providing a fast upgrade solution for legacy analogue systems. \u003cbr\u003e \u003cbr\u003e With an unrestricted 100Base-T full duplex connection available at a phenomenal 800 metres range, and POE-equipped models delivering full-power 802.3at POE Plus at 600 metres, LONGSPAN assures reliability in the most challenging scenarios. \u003cbr\u003e \u003cbr\u003e LONGSPAN is available in POE and data-only models.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eUnrivalled range, uncompromised bandwidth\u003c\/b\u003e\u003cbr\u003e \u003cbr\u003e IP cameras can demand peak network bandwidth of several times their average data rate while transmitting critical high-activity or low-light scenes.  That's why LONGSPAN has been designed to support the full 200Mbps bandwidth required for reliable 100Base-T Ethernet at up to 840 metres Cat 6 (or 690 metres Cat 5e).\u003cbr\u003e \u003cbr\u003e For even more extreme distances, LONGSPAN can automatically negotiate a 10Base-T connection, supporting a range in excess of 1000 metres, over ten times the conventional limit for cabled Ethernet.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMore power, much further\u003c\/b\u003e\u003cbr\u003e \u003cbr\u003e LONGSPAN models with POE can be powered from conventional IEEE 802.3af POE or 802.3at POE Plus switches and injectors, or Veracity's versatile power supply options can be specified for maximum range and power.\u003cbr\u003e \u003cbr\u003e The full 25 watts required for POE Plus devices is available at up to 600 metres Cat 6 when a Veracity power supply is used, or 5 to 20 watts can be delivered from other POE sources depending on range and cable type\u003cbr\u003e\u003cbr\u003e\u003cb\u003eUpgrade to IP, keep the UTP\u003c\/b\u003e\u003cbr\u003e \u003cbr\u003e Sites with legacy analogue cameras often use UTP baluns to send video over several hundred metres of twisted pair cable.  LONGSPAN facilitates a simple upgrade path to IP for these installations.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eHigh density, high reliability\u003c\/b\u003e\u003cbr\u003e \u003cbr\u003e LONGSPAN's unique, expandable mounting system permits up to 24 channels to be mounted in just 1U of rack space, with configurable rear-mount power supplies available if desired.\u003cbr\u003e \u003cbr\u003e Smart diagnostic LEDs, including a SafeViewTM display on POE models, provide instant confirmation of cable-dependant power availability, and feedback of remote link status and other diagnostic information, for fast, confident installation.\u003cbr\u003e LONGSPAN can automatically detect and adapt to single-pair cables, and deliver the same uncompromised 10 or 100Base-T connection up to 900 metres, assuring predictable IP video quality each and every time.\u003c\/p\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":46649522028729,"sku":"VLS1PB","price":363.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/241969348.jpg?v=1773849353"},{"product_id":"veracity-pointsource-wireless-battery","title":"Veracity POINTSOURCE Wireless Battery","description":"Veracity POINTSOURCE Wireless Battery - For PoE Injector - Battery Rechargeable - Proprietary Battery Size - 3400 mAh - 12 V DC\n\u003cul\u003e\n\u003cli\u003eLead Acid battery chemistry for your convenience and better usability\u003c\/li\u003e\n\u003cli\u003eProprietary Battery Size battery size for maximum productivity with added dependability\u003c\/li\u003e\n\u003cli\u003e6 Hour maximum battery runtime helps you stay unwired and work longer non-stop\u003c\/li\u003e\n\u003cli\u003eDelivers 12 V DC to your compatible poe injector, ensuring that your device is ready to use when needed\u003c\/li\u003e\n\u003cli\u003eSave your precious time by recharging the battery instead of running to the store each time you run out of batteries\u003c\/li\u003e\n\u003cli\u003e3400 mAh battery capacity allows longer, charged usage in a dependable manner with maximum feasibility\u003c\/li\u003e\n\u003cli\u003eOffers a reasonable fit to your poe injector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":46649765036217,"sku":"VAD-PS-BM","price":93.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/242266022.jpg?v=1773853092"},{"product_id":"veracity-outbreak-vor-ob12-power-over-ethernet-splitter","title":"Veracity OUTBREAK VOR-OB12 Power over Ethernet Splitter","description":"\u003cp\u003eVeracity's OUTBREAK lets you upgrade network equipment such as IP cameras to be fully PoE compatible.\u003c\/p\u003e\u003cp\u003eSimply connect OUTBREAK in line with the IP camera's network connection, and wire its DC output to the camera's power input. The camera can then connect to the network while OUTBREAK converts Power over Ethernet to the lower-voltage supply it requires.\u003c\/p\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":67651423142073,"sku":"VOR-OB12","price":59.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/241928813.jpg?v=1791254555"},{"product_id":"veracity-highwire-powerstar-base-4-linklock-four-channel-unit-with-linklock","title":"Veracity HIGHWIRE Powerstar Base 4 LINKLOCK - Four Channel Unit With LINKLOCK","description":"\u003cp\u003e\u003cb\u003eLINKLOCK™ technology provides secure tamper-proof network connections over coax cable \u003c\/b\u003e\u003cbr\u003eLINKLOCK options are available in Veracity's high performance HIGHWIRE Powerstar Base 4 and Base 8 Ethernet and POE over coax devices.  \u003c\/p\u003e \u003cul\u003e \u003cli\u003eTamper-proof Ethernet and POE over coax  \u003c\/li\u003e \u003cli\u003e8 tamper-proof channels per Base unit \u003c\/li\u003e \u003cli\u003eTampering or interference with cabling shuts down channel \u003c\/li\u003e \u003cli\u003eRelay contact alarm output on tamper, with reset pins \u003c\/li\u003e \u003cli\u003e32 POE or POE Plus channels in 1U with four Base units \u003c\/li\u003e \u003cli\u003eAutomatic configuration for simple installation \u003c\/li\u003e \u003cli\u003eFull duplex 100Base-TX performance on each coax\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cb\u003e\u003cb\u003eLINKLOCK™ provides a secure barrier to unauthorised access to your network  \u003c\/b\u003e\u003cbr\u003e\u003c\/b\u003eLINKLOCK™ detects any disconnection\/reconnection or tampering with any part of the cabling between the Base unit and the IP camera or other POE device. \u003cbr\u003e\u003cb\u003e \u003cbr\u003e\u003cb\u003eWhen Is LINKLOCK Required ? \u003c\/b\u003e\u003cbr\u003e\u003c\/b\u003eAny externally mounted IP cameras potentially leave an exposed network connection which could be used by attackers to access the rest of the network - to disable the surveillance system for example. This may also expose the corporate network as this is often bridged to the surveillance network. LINKLOCK prevents such attacks by completely disconnecting power and data for that channel whenever it detects a cable disconnection or reconnection or even any tampering such as \"tapping in\" to the coax or network cables. \u003cbr\u003e\u003cb\u003e \u003cbr\u003e\u003cb\u003eHow Does LINKLOCK Work ? \u003c\/b\u003e\u003cbr\u003e\u003c\/b\u003eLINKLOCK works by constantly monitoring the POE power connection and data transmissions. It can detect even subtle changes or interruptions in the data transmission characteristics which will trigger disconnection and alarm, whilst remaining extremely robust against false alarms. Once triggered and disconnected, the channel can be re-established via the reset pins after suitable action is taken to determine the cause of the alarm (i.e. a possible attacker). \u003cbr\u003e\u003cb\u003e \u003cbr\u003e\u003cb\u003eHIGHWIRE Powerstar Base LINKLOCK Option \u003c\/b\u003e\u003cbr\u003e\u003c\/b\u003eLINKLOCK™ is available as an option on Veracity's HIGHWIRE Powerstar Base 4 and Base 8 models of Ethernet and POE over coax adaptors. The Base unit accepts external power via a POE switch or a DC power supply. It sends power over the coax link to the Camera unit. The camera unit in turn provides POE (Power-overEthernet) to the IP camera. See HIGHWIRE Powerstar Base 4 or Base 8 datasheets for full information on HIGHWIRE. \u003cbr\u003e\u003cb\u003e \u003cbr\u003e\u003cb\u003eLINKLOCK provides \u003c\/b\u003e\u003cbr\u003e\u003c\/b\u003eprotection to both the coaxial cable and the Ethernet cable connecting the IP camera to the HIGHWIRE Camera unit (sections A and B in the diagram opposite). LINKLOCK disconnection (blocking mode) is triggered when: The coaxial cable A is disconnected The Ethernet cable B is disconnected The coaxial cable A is disrupted The Ethernet cable B is disrupted Note that having a secure or encrypted link over the coax alone does not prevent intrusion as the Ethernet link to the camera would still be open and unsecured without LINKLOCK. \u003cbr\u003eWhen blocking mode is enabled, all external equipment is immediately isolated from the internal LAN. The internally-located HIGHWIRE Powerstar Base 4 or 8 unit will : Remove POE Power from the coaxial cable (this disconnects and switches off the HIGHWIRE Camera unit and IP camera). Completely disable its coaxial network interface for the triggered channel only. Close the alarm relay contact and indicate the alarm channel with a red LED. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic configuration for simple installation\u003c\/li\u003e\n\u003cli\u003eFull duplex 100Base-TX performance on each coax\u003c\/li\u003e\n\u003cli\u003e32 POE or POE Plus channels in 1U with four Base units\u003c\/li\u003e\n\u003cli\u003eRelay contact alarm output on tamper, with reset pins\u003c\/li\u003e\n\u003cli\u003eTampering or interference with cabling shuts down channel\u003c\/li\u003e\n\u003cli\u003e8 tamper-proof channels per Base unit\u003c\/li\u003e\n\u003cli\u003eTamper-proof Ethernet and POE over coax\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":67651492872377,"sku":"VHW-HWPS-B4-LL","price":906.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/241972495.jpg?v=1791256402"},{"product_id":"veracity-viewspan-solo-video-wall-controller-1-or-2-outputs-us-power-cable","title":"Veracity VIEWSPAN Solo video wall controller, 1 or 2 outputs \u0026 US power cable","description":"\u003cb\u003eAn industrial-grade, high performance video display controller for supplementary displays\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eVIEWSPAN Solo ® is a video display controller for single or dual screens, with highly optimised video processing software delivering high performance in a compact format.\n\u003cul\u003e\n\u003cli\u003eSingle or dual outputs for full HD monitors\u003c\/li\u003e\n\u003cli\u003eDecoding and display of 25 full HD streams at 30 FPS\u003c\/li\u003e\n\u003cli\u003eSingle Windows 10 desktop canvas\u003c\/li\u003e\n\u003cli\u003eDecoding of any video format, resolution and frame rate\u003c\/li\u003e\n\u003cli\u003eDesigned for spot monitor or additional display applications\u003c\/li\u003e\n\u003cli\u003eLow power consumption (25W typical)\u003c\/li\u003e\n\u003cli\u003eCompact format, with LCD info panel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":67654275727545,"sku":"VSPAN-SOLO-US","price":1295.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/241940105.jpg?v=1791307112"},{"product_id":"veracity-rmpsu-splitter-cord","title":"Veracity RMPSU Splitter Cord","description":"4 way linking cable for use with VPSU-57V-1500 to allow up to 4 units to be powered from 1 power supply\n\u003cul\u003e\n\u003cli\u003eOut of power connectors? Splitter cable is the answer. It can attach additional floppy drives, removable storage drives, hard drives, CD-ROMs, CD-RWs, tape drives, fans, etc. to your computer's power supply.\u003c\/li\u003e\n\u003cli\u003eHelps you keep your device charged, up and running\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":67657178841273,"sku":"RMPSU-4W","price":14.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/241962291.jpg?v=1791349783"},{"product_id":"veracity-highwire-powerstar-quad","title":"Veracity HIGHWIRE Powerstar Quad","description":"\u003cb\u003eConnect up to four IP cameras with HIGHWIRE Powerstar Quad over an existing coax cable\u003cbr\u003e\u003cbr\u003e \u003c\/b\u003eHIGHWIRE Powerstar Quad uses existing coax cabling as a reliable Ethernet network connection and is very easy to use and fast to install.\u003cbr\u003e\u003cb\u003e\u003cbr\u003eEthernet Over Coax\u003c\/b\u003e \u003cbr\u003e\u003cbr\u003eHIGHWIRE Powerstar Quad's unique ultra low-power design and efficient power delivery enables long range Ethernet over coax. It works even over the lowest grade cable, such as the highresistance, copper-clad steel (CCS) types found in many legacy installations. This means that legacy coax upgrades can be planned with confidence, while a quick check of the SafeView™ power level display reaffirms that the device connections will continue to be reliable, whatever the cable used.\u003cbr\u003e\u003cbr\u003e For predictable network operation with no restrictions, HIGHWIRE technology delivers a full 200Mbit\/s of bandwidth at 300m (1000 ft) of RG-59 or 500m (1600 ft) of RG-11 coax. For full information on POE-over-Coax™ distances achievable, please refer to the Range Table in the HIGHWIRE Powerstar datasheet or on the Veracity website. For POE power budget and power supply options, see the POE Power Budget Table opposite.\u003cb\u003e \u003cbr\u003e\u003cbr\u003eHIGHWIRE Powerstar QUAD\u003c\/b\u003e \u003cbr\u003e\u003cbr\u003eThe QUAD variant of HIGHWIRE is designed for the camera end of the coax and, with an integrated four-port POE switch, enables connection of up to four IP cameras over a single coax. With no need to configure IP addresses, set DIP switches, or make awkward measurements and calculations, installing HIGHWIRE Powerstar QUAD is simple. The Base end of the coax is driven by single-channel, 4-channel or 8-channel HIGHWIRE Powerstar Base unit. The QUAD unit can be powered either by POE over coax, delivering a maximum total POE power budget of 25 watts, or by one of the optional local PSUs, delivering 40 or 78 watts. HIGHWIRE Powerstar Quad features Veracity's unique SafeView™ display, to provide IP camera installers with an instant and very easy-to-understand confirmation of correct operation from either end of the cable.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eHIGHWIRE Powerstar Quad allows one analogue camera to be replaced with four IP cameras\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePOE over Coax or Local Power\u003cbr\u003e\u003cbr\u003e\u003c\/b\u003e In the simplest implementation (shown below left) the BASE unit receives power from a standard POE switch or Veracity's 57V DC PSU and transmits POE over the coax. The QUAD unit receives this power and delivers up to 25 watts shared between up to four IP cameras. No external power cabling is required, and all detection and setup occurs automatically. For higher POE power budgets, an optional Veracity 57V DC PSU may be used to power the QUAD locally at the camera end (shown below right) delivering 40 watts or 78 watts depending on PSU model. See POE budget table for details","brand":"Veracity","offers":[{"title":"Default Title","offer_id":67658009968825,"sku":"VHW-HWPS-C4","price":476.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/241843412.jpg?v=1791365443"},{"product_id":"archived-veracity-ac-adapter","title":"ARCHIVED Veracity AC Adapter","description":"Veracity AC Adapter - 57 V DC Output - 1.50 A\n\u003cul\u003e\n\u003cli\u003eIt supplies continuous power to your gadgets\u003c\/li\u003e\n\u003cli\u003e1.50 A current enables your device recharge quickly\u003c\/li\u003e\n\u003cli\u003eNetwork Switch device supported for your convenience and better usability\u003c\/li\u003e\n\u003cli\u003eDelivers constant 57 V DC for smooth functioning \u0026amp; charging of the device\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":67664003301561,"sku":"VPSU-57V-1500-US","price":89.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/242002705.jpg?v=1791415023"},{"product_id":"veracity-pointsource-poe-injector","title":"Veracity POINTSOURCE PoE Injector","description":"\u003cp\u003e\u003cb\u003eInstall, configure, focus and align IP cameras with a wireless link to your tablet or phone\u003cbr\u003e\u003cbr\u003e\u003c\/b\u003ePOINTSOURCE Wireless is a battery powered POE injector, with a wireless network link, designed to allow simple and efficient IP camera installation with live video to smartphones, tablets and laptops.\u003c\/p\u003e \u003cp\u003e\u003cb\u003ePortable POE battery pack with removable, rechargeable battery module, for site installation of IP cameras and site surveys\u003cbr\u003e\u003cbr\u003e\u003c\/b\u003ePOINTSOURCE WIRELESS has automatic camera discovery and wireless video to your smart phone or tablet, and is ideal for powering POE IP cameras in-situ, when in-line POE is not yet available. It includes a convenient USB charging port for your phone or tablet.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eBattery Powered POE Injector\u003c\/b\u003e\u003cbr\u003eVeracity's POINTSOURCE Wireless is a portable, battery-powered POE injector\u003cbr\u003eproviding wireless network access to the IP camera it is powering. It is connected directly to the camera using a standard Ethernet network cable\u003c\/p\u003e \u003cp\u003e\u003cb\u003eWireless Network Access\u003c\/b\u003e\u003cbr\u003ePOINTSOURCE Wireless delivers POE to the camera and connects the IP\u003cbr\u003ecamera to the embedded wireless access point. By logging into the wireless network, live video can be viewed wirelessly on a smartphone, laptop or tablet.\u003c\/p\u003e \u003cp\u003ePOINTSOURCE Wireless features automatic camera discovery, including ONVIF. It has a default network SSID with password and an IP address for accessing the device itself. These may be changed as required by the user. The wireless link can be switched between 2.4GHz and 5GHz. A reset function is available to reset the device to default factory settings.\u003c\/p\u003e \u003cp\u003eThe wireless LED flashes as the unit boots up and is steady when the link is available. The POE port LED shows when the camera is powered, whilst the network port LEDs indicate the wired link speed (10\/100) and network activity.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eBrowser Connection\u003c\/b\u003e\u003cbr\u003eUpon connecting to POINTSOURCE Wireless with a wireless-network-enabled laptop, tablet or smartphone, through a browser, the user is presented with a web page, allowing configurationof thePOINTSOURCE Wireless itself and  showing the IP address of the connected camera. Configuration functionality depends upon the IP camera manufacturer's supported features and functions.\u003c\/p\u003e \u003cp\u003eThe system firmware is field-upgradeable to allow updates for new features and special camera types.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eCAMPOINT Smart App\u003c\/b\u003e\u003cbr\u003eVeracity provide a smart app called CAMPOINT (on iOS and Android) for IP camera configuration. This enables simple wireless viewing of video from one or more IP cameras on a smart phone or tablet. CAMPOINT runs on smart phones and tablets to make IP camera installations simple, fast and convenient to use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes convenient USB charging point for tablets and smart phones\u003c\/li\u003e\n\u003cli\u003eSupports all classes of 802.3af and 802.3at POE devices\u003c\/li\u003e\n\u003cli\u003eAdditional spare batteries available for rapid swap over\u003c\/li\u003e\n\u003cli\u003eRemovable, rechargeable battery with sufficient power for a day's installation work\u003c\/li\u003e\n\u003cli\u003eEnables rapid and precise adjustment of camera alignment, focus and field of view\u003c\/li\u003e\n\u003cli\u003eAllows local viewing of IP camera video wirelessly on smart devices close to camera\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":67664850813113,"sku":"VAD-PSW","price":761.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/241876611.jpg?v=1791422489"},{"product_id":"veracity-highwire-powerstar-camera-backbox-for-installation-at-the-camera-side","title":"Veracity HIGHWIRE Powerstar Camera Backbox For Installation At The Camera Side","description":"\u003cb\u003eEthernet and POE over coax device for inside IP camera housing \u003cbr\u003e\u003c\/b\u003eHIGHWIRE Powerstar uses existing coax cable to connect and power IP cameras without re-cabling costs. Designed for camera backboxes and housings.  \u003cbr\u003e\u003cbr\u003e \u003cul\u003e \u003cli\u003eCompact unit for inside cameras housings   \u003c\/li\u003e \u003cli\u003eFlexible leads for easy connection in small spaces  \u003c\/li\u003e \u003cli\u003eReliably powers POE Plus cameras up to 25watts \u003c\/li\u003e \u003cli\u003eSAFEVIEW™ instantly checks connection + power status \u003c\/li\u003e \u003cli\u003eCompatible with all HIGHWIRE Powerstar Base units  \u003c\/li\u003e \u003cli\u003eSimple fast, cost-effective installation  \u003c\/li\u003e \u003cli\u003eFull 100Base-TX Ethernet performance \u003c\/li\u003e \u003c\/ul\u003e \u003cb\u003eA version of our highly successful HIGHWIRE Powerstar device specifi cally designed for inside camera housings \u003cbr\u003e\u003c\/b\u003eA true plug-and-play solution for connecting and powering IP cameras over legacy coaxial cabling \u003cbr\u003e\u003cb\u003e \u003cbr\u003eReliability Assured \u003c\/b\u003e \u003cbr\u003eHIGHWIRE Powerstar's unique ultra low-power design and effi cient power delivery enables long range extension even over the lowest-grade cable, such as the high-resistance copperclad steel (CCS) types found in many legacy installations. This means that legacy coax upgrades can be planned with confi dence, while a quick check of the SAFEVIEW™ power display reaffi rms that the devices' connection will continue to be reliable, whatever the cable used. Reliable power delivery is also ensured at the source, where either dependable screw terminal connections or a UPS-backed POE supply can be used. For predictable network operation with no restrictions, HIGHWIRE delivers a full 200Mbit\/s of bandwidth at 300m (1000 ft) of RG-59 or 500m (1600 ft) of RG-11 coax.  \u003cbr\u003e\u003cb\u003e  \u003cbr\u003eNo Configuration  \u003cbr\u003e\u003c\/b\u003eWith no need to confi gure IP addresses, set DIP switches, or make awkward measurements and calculations, installing HIGHWIRE Powerstar is so straight forward, all you do is plug it in. In the most simple implementation, the BASE unit receives POE power from a standard POE switch or injector and transmits it down the coax. The CAMERA unit receives this power and forwards it on to the IP camera. No external power cabling is required, and all of the detection and setup occurs automatically \u003cbr\u003e\u003cb\u003e \u003cbr\u003eDesigned For Camera Housings  \u003cbr\u003e\u003c\/b\u003eHIGHWIRE Powerstar Backbox has connectors on fl exible fl ying leads for easier mounting inside camera housings, allowing the connectors to be moved into convenient positions. Note that Backbox is powered by POE only (no external DC power option). \u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eFull 100Base-TX Ethernet performance\u003c\/li\u003e\n\u003cli\u003eSimple fast, cost-effective installation\u003c\/li\u003e\n\u003cli\u003eCompatible with all HIGHWIRE Powerstar Base units\u003c\/li\u003e\n\u003cli\u003eSAFEVIEW™ instantly checks connection + power status\u003c\/li\u003e\n\u003cli\u003eReliably powers POE Plus cameras up to 25watts\u003c\/li\u003e\n\u003cli\u003eCompact unit for inside cameras housings\u003c\/li\u003e\n\u003cli\u003eFlexible leads for easy connection in small spaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":67665305305273,"sku":"VHW-HWPS-CBB","price":273.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/241891211.jpg?v=1791427686"},{"product_id":"veracity-outbreak-5-volt-poe-splitter","title":"Veracity OUTBREAK 5 Volt POE Splitter","description":"\u003cb\u003ePOE splitter for 12V IP cameras and other devices\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eVeracity's OUTBREAK lets you upgrade network equipment such as IP cameras to be fully POE compatible.\u003cbr\u003e \u003cbr\u003e Simply connect OUTBREAK in line with the IP camera's network connection, and wire its DC output to the camera's power input. The camera can then connect to the network while OUTBREAK converts Power over Ethernet to the lower-voltage supply it requires.","brand":"Veracity","offers":[{"title":"Default Title","offer_id":67667575439545,"sku":"VOROB5","price":59.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/242265735.jpg?v=1791447985"},{"product_id":"veracity-longspan-max-quad-4-channel-hi-power-90w-long-range-ethernet-up-to-820m","title":"Veracity LONGSPAN Max Quad. 4 channel, Hi-Power, 90W long-range Ethernet, up to 820m.","description":"\u003cp\u003e\u003cb\u003eThe Power and Bandwidth your IP Camera Needs, at Exceptional Distances\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eLONGSPAN delivers unprecedented power and bandwidth over extreme lengths of regular Cat 5e or Cat 6 network cable, enabling a dependable connection to IP cameras and other remote network devices.\u003cbr\u003e\u003cbr\u003eLONGSPAN is a point-to-point solution. It self-configures for the best performance. No set up or configuration is required. LONGSPAN even supports single-pair UTP cables, providing a fast upgrade solution for legacy analogue systems.\u003cbr\u003e\u003cbr\u003eLONGSPAN offers unrestricted 100Base-TX at a phenomenal 820 metres range, with POE-equipped models delivering full-power 802.3at POE Plus at 600 metres, LONGSPAN assures reliability in the most challenging scenarios.\u003cbr\u003e\u003cbr\u003eLONGSPAN is available in POE and data-only models. It is also available in high power Max single and Quad versions for the base and camera ends. See Documentation Tab for all datasheets including LONGSPAN Base 8, LONGSPAN Max and LONGSPAN Max Quad datasheets.\u003c\/p\u003e \u003cp\u003eUnrivalled range, uncompromised bandwidth\u003cbr\u003e\u003cbr\u003eIP cameras can demand peak network bandwidth of several times their average data rate while transmitting critical high-activity or low-light scenes. That's why LONGSPAN has been designed to support the full 200Mbps bandwidth required for reliable 100Base-TX Ethernet at up to 820 metres Cat 6 (or 690 metres Cat 5e).\u003cbr\u003e\u003cbr\u003eFor even more extreme distances, LONGSPAN can automatically negotiate a 10Base-T connection, supporting a range in excess of 1000 metres, over ten times the conventional limit for cabled Ethernet.\u003c\/p\u003e \u003cp\u003eMore power, much further\u003cbr\u003e\u003cbr\u003eLONGSPAN models with POE can be powered from conventional IEEE 802.3af POE or 802.3at POE Plus and 802.3bt High Power POE switches and injectors, or Veracity's versatile power supply options can be specified for maximum range and power.\u003cbr\u003e\u003cbr\u003eThe full 25 watts required for POE Plus devices is available at up to 600 metres Cat 6 when a Veracity power supply is used, or 5 to 20 watts can be delivered from other POE sources depending on range and cable type. LONGSPAN Max High Power devices are also now available up to 90W.\u003cbr\u003e\u003cbr\u003eUpgrade to IP, keep the UTP\u003cbr\u003e\u003cbr\u003eSites with legacy analogue cameras often use UTP baluns to send video over several hundred metres of twisted pair cable.  LONGSPAN facilitates a simple upgrade path to IP for these installations.\u003cbr\u003e\u003cbr\u003eLONGSPAN can automatically detect and adapt to single-pair cables, and deliver the same uncompromised 10 or 100Base-TX connection up to 820 metres, assuring predictable IP video quality each and every time.\u003c\/p\u003e \u003cp\u003eHigh density, high reliability\u003c\/p\u003e \u003cp\u003eLONGSPAN's unique, expandable mounting system permits up to 24 channels to be mounted in just 1U of rack space, with configurable rear-mount power supplies available if desired.\u003cbr\u003e\u003cbr\u003eSmart diagnostic LEDs, including a SAFEVIEW® display on POE models, provide instant confirmation of cable-dependent power availability, and feedback of remote link status and other diagnostic information, for fast, confident installation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutdoor or perimeter IP cameras, buried cable links\u003c\/li\u003e\n\u003cli\u003eWireless access points or any POE devices\u003c\/li\u003e\n\u003cli\u003eExtension of all Ethernet networks\u003c\/li\u003e\n\u003cli\u003eUpgrade of analogue cameras fitted with twisted pair video baluns\u003c\/li\u003e\n\u003cli\u003eAnywhere there's UTP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":67670473507001,"sku":"VLS-LSM-C4","price":547.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/242204467.jpg?v=1791474501"},{"product_id":"veracity-highwire-powerstar-base-8-linklock-eight-channel-unit-with-linklock","title":"Veracity HIGHWIRE Powerstar Base 8 LINKLOCK Eight Channel Unit With LINKLOCK","description":"\u003cb\u003eLINKLOCK™ technology provides secure tamper-proof network connections over coax cable \u003c\/b\u003e\u003cbr\u003e\u003cb\u003e \u003cbr\u003e\u003c\/b\u003eLINKLOCK options are available in Veracity's high performance HIGHWIRE Powerstar Base 4 and Base 8 Ethernet and POE over coax devices.  \u003cbr\u003e \u003cul\u003e \u003cli\u003eTamper-proof Ethernet and POE over coax  \u003c\/li\u003e \u003cli\u003e8 tamper-proof channels per Base unit \u003c\/li\u003e \u003cli\u003eTampering or interference with cabling shuts down channel \u003c\/li\u003e \u003cli\u003eRelay contact alarm output on tamper, with reset pins \u003c\/li\u003e \u003cli\u003e32 POE or POE Plus channels in 1U with four Base units \u003c\/li\u003e \u003cli\u003eAutomatic configuration for simple installation \u003c\/li\u003e \u003cli\u003eFull duplex 100Base-TX performance on each coax\u003c\/li\u003e \u003c\/ul\u003e \u003cb\u003eLINKLOCK™ provides a secure barrier to unauthorised access to your network  \u003c\/b\u003e\u003cbr\u003eLINKLOCK™ detects any disconnection\/reconnection or tampering with any part of the cabling between the Base unit and the IP camera or other POE device. \u003cbr\u003e \u003cbr\u003e\u003cb\u003eWhen Is LINKLOCK Required ? \u003c\/b\u003e\u003cbr\u003e Any externally mounted IP cameras potentially leave an exposed network connection which could be used by attackers to access the rest of the network - to disable the surveillance system for example. This may also expose the corporate network as this is often bridged to the surveillance network. LINKLOCK prevents such attacks by completely disconnecting power and data for that channel whenever it detects a cable disconnection or reconnection or even any tampering such as \"tapping in\" to the coax or network cables. \u003cbr\u003e \u003cbr\u003e\u003cb\u003eHow Does LINKLOCK Work ? \u003c\/b\u003e\u003cbr\u003eLINKLOCK works by constantly monitoring the POE power connection and data transmissions. It can detect even subtle changes or interruptions in the data transmission characteristics which will trigger disconnection and alarm, whilst remaining extremely robust against false alarms. Once triggered and disconnected, the channel can be re-established via the reset pins after suitable action is taken to determine the cause of the alarm (i.e. a possible attacker). \u003cbr\u003e \u003cbr\u003e\u003cb\u003eHIGHWIRE Powerstar Base LINKLOCK Option \u003c\/b\u003e\u003cbr\u003e LINKLOCK™ is available as an option on Veracity's HIGHWIRE Powerstar Base 4 and Base 8 models of Ethernet and POE over coax adaptors. The Base unit accepts external power via a POE switch or a DC power supply. It sends power over the coax link to the Camera unit. The camera unit in turn provides POE (Power-overEthernet) to the IP camera. See HIGHWIRE Powerstar Base 4 or Base 8 datasheets for full information on HIGHWIRE. \u003cbr\u003e \u003cbr\u003e\u003cb\u003eLINKLOCK provides \u003c\/b\u003e\u003cbr\u003eprotection to both the coaxial cable and the Ethernet cable connecting the IP camera to the HIGHWIRE Camera unit (sections A and B in the diagram opposite). LINKLOCK disconnection (blocking mode) is triggered when: The coaxial cable A is disconnected The Ethernet cable B is disconnected The coaxial cable A is disrupted The Ethernet cable B is disrupted Note that having a secure or encrypted link over the coax alone does not prevent intrusion as the Ethernet link to the camera would still be open and unsecured without LINKLOCK. \u003cbr\u003eWhen blocking mode is enabled, all external equipment is immediately isolated from the internal LAN. The internally-located HIGHWIRE Powerstar Base 4 or 8 unit will : Remove POE Power from the coaxial cable (this disconnects and switches off the HIGHWIRE Camera unit and IP camera). Completely disable its coaxial network interface for the triggered channel only. Close the alarm relay contact and indicate the alarm channel with a red LED. \u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eFull duplex 100Base-TX performance on each coax\u003c\/li\u003e\n\u003cli\u003eAutomatic configuration for simple installation\u003c\/li\u003e\n\u003cli\u003e32 POE or POE Plus channels in 1U with four Base units\u003c\/li\u003e\n\u003cli\u003eRelay contact alarm output on tamper, with reset pins\u003c\/li\u003e\n\u003cli\u003eTampering or interference with cabling shuts down channel\u003c\/li\u003e\n\u003cli\u003e8 tamper-proof channels per Base unit\u003c\/li\u003e\n\u003cli\u003eTamper-proof Ethernet and POE over coax\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":67670958997689,"sku":"VHW-HWPS-B8-LL","price":1619.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/242392885.jpg?v=1791482527"},{"product_id":"veracity-1u-psu-tray","title":"Veracity 1U PSU Tray","description":"Veracity 1U PSU Tray - 1U Rack Height - Rack-mountable\n\u003cul\u003e\n\u003cli\u003eRackmount Kit allows quick and easy retrieval of your items with better organizing and feasible mounting\u003c\/li\u003e\n\u003cli\u003eRack-mountable rackmount kit enables you to organize wires and secure cables for professional installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":67671115301049,"sku":"VPSU-TRAY-ASSY","price":78.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/242405008.jpg?v=1791485581"},{"product_id":"veracity-highwire-longstar-lite-non-poe-long-range-ethernet-over-coax","title":"Veracity HIGHWIRE Longstar Lite Non POE Long Range Ethernet over Coax","description":"\u003cp\u003e\u003cb\u003eUnrestricted 100Base-T and POE over 1400m\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eHIGHWIRE Longstar delivers unsurpassed power and bandwidth over extreme distances of coax cable.\u003cbr\u003e \u003cbr\u003e Deliver unsurpassed power and bandwidth over extreme distances of coaxial cable. Cut costs and installation time by re-using long runs of legacy coax cabling, especially in rail and metro applications.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eLong-range Ethernet with POE over coax at distances up to 1,400 metres\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eHIGHWIRE Longstar's ruggedness and high performance is particularly suited to rail, metro and industrial applications. HIGHWIRE Longstar delivers unsurpassed distances.\u003c\/p\u003e \u003cp\u003eHIGHWIRE Longstar delivers a full bandwidth 100Base-T network signal and POE Plus over unsurpassed lengths of regular coaxial cable. It provides the reassurance of exceptional performance and reliability, while enabling considerable savings in the cost, time and risk of upgrading legacy analogue camera installations to IP.\u003c\/p\u003e \u003cp\u003eA range of 540 - 690 metres with RG-59 or even up to 1400 metres with RG-11 is supported, without compromising the 100Base-T data rate. For even greater distances it can automatically configure to 10Base-T operation, running approximately three times further with data only. Models with optional POE in or out can deliver the full 25 watts of 802.3at POE Plus to cameras over the same legacy cable.\u003c\/p\u003e \u003cp\u003eDesigned for straight-forward installation, all the HIGHWIRE Longstar models are entirely self-configuring, and feature extended temperature operation, have a rugged enclosure with both wall-mount or high density rack mounting options.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eDesigned for Installers\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eUsed in pairs, installation of HIGHWIRE Longstar is extremely fast and efficient. The devices self-configure and self optimise on connection. No set-up or system pairings are required. Data and power connections are easily monitored during installation using the embedded LEDs. The system incorporates Veracity's SafeView™ technology, which provides instant confirmation of link status, power level and diagnostic information.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eFlexible High Performance\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eAlthough designed for 75 Ohm cable, HIGHWIRE Longstar will operate over 50 Ohm cable with full performance and only a slight reduction in the maximum distance attainable.\u003c\/p\u003e \u003cp\u003e\u003cb\u003ePOE - Simple Reliability\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003ePOE-equipped models allow all of the power for the link to be sourced from a POE switch, POE injector or power supply, for simple installation and optional UPS backed power delivery for high resilience against grid power failures.\u003c\/p\u003e \u003cp\u003eHIGHWIRE Longstar is a rugged and low-cost alternative to fibre, also with power delivery It is also suited to new coax installations, due to the low levels of signal distortion through long runs of RG6 or RG11 cabling\u003c\/p\u003e \u003cp\u003eSimple Rackmount Option Up to 24 HIGHWIRE Longstar Base units can be rack-mounted using the simple 1U space-saving bracket. Although HIGHWIRE Longstar POE models can be powered from POE switches or injectors, several Veracity 57V DC power supply options are available (see partcodes) to provide the maximum power and range performance.\u003c\/p\u003e \u003cp\u003eVeracity Power Supply Options Rack-mounted HIGHWIRE Longstar units can be powered by the Veracity 57V DC 1U rackmount power supply. This 8.8A power supply can provide enough power for up to 24 HIGHWIRE Longstar units with POE output. The power unit can be fitted behind the rack-mounted HIGHWIRE Longstars in the same 1U space, thus saving rack space.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 4.2km (2.5 miles) data-only link at 10Base-T without POE\u003c\/li\u003e\n\u003cli\u003eBS EN 50121-4 compliant (rail and metro)\u003c\/li\u003e\n\u003cli\u003eFully automatic, simple to install and maintenance-free\u003c\/li\u003e\n\u003cli\u003eRuggedised for high-performance over extreme temperature range\u003c\/li\u003e\n\u003cli\u003eUnrestricted 100Base-T and POE over 1400m (4,600ft) on RG11\u003c\/li\u003e\n\u003cli\u003eLong range Ethernet and POE over new or legacy coaxial cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Veracity","offers":[{"title":"Default Title","offer_id":67671331635385,"sku":"VLS-1N-LC","price":268.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/files\/242392745.jpg?v=1791486395"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0274\/4490\/4014\/collections\/242375881.jpg?v=1766015349","url":"https:\/\/www.lttpartners.com\/collections\/veracity.oembed","provider":"LTT Partners","version":"1.0","type":"link"}